MCU Case for Prusa Bear - SKR Mini E3 V2.0 and RPI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod for Prusa Bear - Using SKR Mini E3 V2.0 and RPI
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Mod for Prusa Bear - Using SKR Mini E3 V2.0 and RPI
Poorly modded by myself in Tinkercad.
I added the alignment notch for mounting to the back of the 2040 and then I also expanding the mounting holes to accept heat inserts.
I didn't modify the top (lid) as I have printed this before and found that a M3 Cap or Button head will slip into the lid hole where normally a nut would go. In other words, I am using the mounting holes with heat inserts opposite of how it was designed.
I am using Klipper and wanted a case that would house the SKR Mini, Buck Converter and the RPI since the RPI is needed for Klipper.
These are the types of heat inserts I used: https://www.amazon.com/dp/B077CHDSTR