Micro-Load Olympic Weightlifting Storage Pin for Weight Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remove your square cap on top of your rack and throw this buddy in there - Boom - free storage for Micro-Load weights
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
Remove your square cap on top of your rack and throw this buddy in there - Boom - free storage for Micro-Load weights
Sized for Olympic Bar Dia (OD is 46mm). Square is 45mm (or roughly 1-13/16”). Middle square is 25.4mm high to clear weights on the side of the rack.
Print with... whatever! At 10-15% gyroid infill.
I recommend some gorilla tape on the lower corners to stop the whole piece from wobbling. Probably should have designed some springs on the side of this but for now it does the job. Added an image of the tape as I’m not sure what it’s called. A bit like clear 3M vinyl but double sided and thicker.