pz35 VIJIM VL100C Light Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the VIJIM VL100C light to the pz35 + 3mm diffuser
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- BSD License
Credit to @anonxyz for the awesome work making the base design, this is just a simple adapter for the VIJIM VL100C light (Amazon) with space up to 3mm for a diffuser cut to size 40mm X 50mm (this is the acrylic sheet I used Amazon). I modelled after the pz35 backplate using the same holes and shape, so you just need to source a longer bolt (4x M3x25mm) and it should just bolt straight up into the pz35 seamlessly.
Everything else should be friction fit nicely, but you can also superglue the diffuser down as I left a lip around the edge inside. Make sure to clean the inside of the adapter before mounting the light in, as it will be very hard to take apart once its clipped in (but not impossible).