GIANT VHS TAPE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a giant tape that I modeled. It is scaled to 300 percent. I'd recommend that printing the body with 10 percent…
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 2275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a giant tape that I modeled. It is scaled to 300 percent. I'd recommend that printing the body with 10 percent infill and print it on the short end, standing up, with supports turned on to support the holes. Also, use a raft to make sure it doesn't budge.
The spindles should be printed at a 45 degree angle with heavy supports. that's the best way I could figure to do it with the least amount of support material.
The tape can be printed in vase mode.
I cut 2 pieces of plexiglass to make the windows.
Printed on the Ender 5 Plus.
Happy printing! Please post makes!
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
10
Filament: PolyMaker PLA
Category: Gadgets