1 / 2
Z Belt Cover Narrow Extrusion Modification
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification to allow the cover to fit in my extrusions. The originals were too tight to install.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Modified Z belt covers for a Voron 2.4 printer. The part these are based on were modified to allow installation with the stock voron parts couldn't fit under the Z rails and allow a cable to pass through.
I made more modifications to allow the cover to fit in my extrusion channels. The originals were too tight to install, so I narrowed them by 0.01".
Step, 3MF, and STL files are provided, both A and the mirrored version (B). You'll need to print 2x of each.