Heltec V4 military case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case is designed for the Heltec V4 LoRa radio with external wifi and LoRa antennas and an internal GNSS antenna.
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 2977
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This model's main inspiration was the Haven node by @DataSlayer_1802073
The main chassis consists of three parts that fit together with the parts wedged between them. Everything is held together with two M4 bolts. The antenna clips are screwed on with small wood screws. The type doesn't matter as long as it fits.
print with fuzzy skin on the outside for a better surface finish.
To make use of the external wifi antenna, you will need to move a tiny SMD resistor on the PCB. This requires expert soldering skills, and the chance of irreparable damage to the PCB is high. I will release a model without the hole for the wifi antenna in the future.
The normal variant supports batteries up to 60mm x 38mm x 8mm.
The XL variant supports batteries up to 70mm x 46mm x 12mm. This will fit the MakerHawk 3000mAh battery and various other types.
You can find the version without screen here: