Tiger - Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm
The Model is 150x200mm in size
You may print at higher layer heights below the Base Thickness of 0.5mm
The Max allowed Thickness is 2.3mm and the Actual Thickness is 2.3mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#fefdff PLA Basico Control3D Blanco Transmission Distance: 1.2
This print uses 5 unique filaments
Swap Instructions:
Start with PolyLite Black
At layer #7 (0.8mm) swap to BambuLab Basic Blue Gray
At layer #12 (1.3mm) swap to PolyLite Grey
At layer #15 (1.6mm) swap to BambuLab Basic Beige
At layer #19 (2mm) swap to Basico Control3D Blanco for the rest.