Steering wheel wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outside diameter: 80mm Horn diameter hole: 55mm Thickness : 38mm Inserts :M5 (6x)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Standard Digital File License
This is simple and functional wall mount for custom steering wheels. It includes 3 parts .
Slicing
I suggest you print each part separately. I used material ASA (ABS or PETG should be fine or even maybe PLA, but i went with a little bit safer choice).
Use strong infill (50-100%), especialy if you are going to use PLA, which i dont reccomend.
Put supports on, i used tree automatic suports and 0.16mm z distance and for ASA material it worked perfectly.
Print pin on 100% infill
Pin has a little more tolerance space for the cross hole, exactly because of the suports and vertical holes.
Orientation on the print bed
Installation
First part goes directly in the wall with two screws. Then you assemble stering wheel to the second part. Holes should fit perfectly, if you added inserts the correct way. When you have part 2 and wheel assembled you just "plug in" part 2 into part 1 on the wall and insert the pin in. If pin dont fit than you should try printing pin at 99-97% scale.
!!! Be careful with pin its strong enough to hold it in between the parts, but in your hands it could crack easily.
I hope this model helps you hang your super fancy steering wheel and let me know if you have any difficulties or ideas for improvement :)