Filament Tub Hygrometer Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,89 € – 4,76 € netto (bez VAT)
Dla pliku: Filament Tub Label v4_25-5mm_0.15mm_PLA_MK3S_4h55m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,33 € netto (środek widełek).
- Masa podana przez autora
- 42 g
- Czas druku podany przez autora
- 4,91 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a simple mount for a hygrometer and label in a filament tub, providing visibility to the humidity level inside.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This hygrometer mount hangs on the front of the filament storage tub. If the tub is made of relatively transparent material, you can read the label and the humidity level inside without opening the container. A slot for a label is included. Print is mounted in a vertical position on the bed so that the label slots don't need internal support.
Provided in 2 sizes for different tubs. You may need to adjust for others.
Uses an inexpensive digital hygrometer such as this one. Other hygrometers may require adjustment to the mounting hole.
https://www.amazon.com/dp/B07GNMKYCZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2