1 / 2
Crimper Die Case (print in place, easier latches) — zdjęcie 1
1 / 2

Crimper Die Case (print in place, easier latches)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My printer lacks the ideal tolerances for printing the original file (https://www.thingiverse.com/thing:1544407) with…

Ocena
5 / 5
Polubienia
19
Pobrania
84
Wydruki
1
Wyświetlenia
833
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

My printer lacks the ideal tolerances for printing the original file (https://www.thingiverse.com/thing:1544407) with moving latches... after printing and breaking a couple, I realized I could narrow the latches with very little effort. After doing that, I had my first fully successful print of this object. All the real work was done by the original author, JRad.

I own an "SN" series and an "HS" series crimper with lots of dies for each... this ideally fits the normal dies for an "HS" series straight-outta-Canton crimper. I may do more elaborate remixes for wider dies, and maybe a smaller version to tightly fit "SN" dies at a later time.

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

10%

Filament: Overture PLA Black


Notes:

Tune your print fan and temperature to make perfect bridging before print-in-place efforts, and you'll be happier. All of the hinges have a bar going through a hole, so the cleaner your bridging, the more likely your success.

Post-Printing =============

Using a table / firm surface for leverage, slowly press the hinges until they gain motion first, while gripping the whole box body of the print for leverage. Afterwards, gripping half of the box body, do the same for the main hinge... or freehand that part.

How I Designed This

Opened the original model by JRad in Slic3r, Split the model, Scaled the hinges to 88% on the X axis, Exported the plate as an STL.

Category: Tool Holders & Boxes

Tagi