Fully Parametric PE50 Movement Holder for PD1701 V5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PD1701 V5 parametric PE50 movement holder based on the original. Includes 2 versions (compliant/non-compliant notch).
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
After trying some available movement holders for my PE50 MoonSwitch, I was unhappy with how the dial didn't perfectly align with the PD1701 V5 case. Even after manually aligning the dial, screwing down the case back would cause the dial to rotate. So I decided to design one from scratch based on the original PD1701 movement holder.
I've included two designs: one with a compliant notch and one without. Both are fully parametric with 39/38 parameters.
Note for Fusion 360 Users:
When changing certain parameters (like the case internal diameter), Fusion 360 has a bug where the circular patterns may fail to regenerate. To fix this:
Edit the "Notch & Bumps" sketch.
Double-click on both circular patterns in the center.
Click "OK" and then "Finish Sketch".
Print Settings:
I printed mine in ABS on a highly calibrated printer.
Layer height: 0.12mm
First layer: 0.20mm
Supports: None
You may need to adjust some parameters based on your printer's accuracy. Please let us know which parameters worked for you in the comments. Enjoy!