1 / 7
Miniature Snowboard for Labubu - Snug Fit - Boots Too — zdjęcie 1
1 / 7

Miniature Snowboard for Labubu - Snug Fit - Boots Too

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The snowboard shape is realistic and the boots stay put in the bindings. Part of a set: boots, scarf, aviators.

Ocena
5 / 5
Polubienia
19
Pobrania
112
Wydruki
1
Wyświetlenia
388
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

Print Specifications from the photos

Specification

Value

Estimated Print Time

48 Minutes

Filament Used

5.6 g

Layer Height

0.20 mm

Wall Thickness

3 perimeters

Top Fill Pattern

Hilbert Curve

Bottom Fill Pattern

Hilbert Curve

Supports Required

No

Adaptive Layer Height

Enabled

Settings Used

  • This Print: PLA • 0.40mm nozzle • 222°C Nozzle • 55°C Bed

Print Notes

  • Optimized for Ender 3 V2 with BLTouch bed leveling

  • Uses off-print purge line to prevent nozzle blobs

  • Exported from PrusaSlicer

  • ⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues

  • Recommended: Test on a small print first before large jobs

Tagi