1 / 2
Practical Coat Hanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I recommend slicing with the current orientation of the print file for maximum strength.
I used PETG, as long as it’s not used outside just about any material would do indoors.
For Settings I used 40% Infill with 5 walls to maximize strength.
Unsure of what size screws I used. I just measured the OD of the screws I had extra that were originally for hanging up window curtains.
The bottom screw will have to be driven with a long screw driver or a very long driver bit considering the bottom screw hole is snug to the top of the hook to maximize fastening to the wall without shortening the hook.