1 / 4
Tubing clamp for brake bleeder valve — zdjęcie 1
1 / 4

Tubing clamp for brake bleeder valve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A clamp that holds your brake bleed-tube onto the bleeder-valve (nipple) so it doesn't slip off.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
74
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When bleeding brakes, the bleed tube can fall off of the bleed valve creating a mess and interrupting the work. Using modern flexible and chemical-resistant silicone tubing can exacerbate the problem, because the tubing is so stretchy it does not hold on as tightly as older vinyl tubing.

This 3D-printable clamp goes over the silicone (or other tubing) at bleed valve to hold it onto the bleed valve nipple.

Multiple sizes are provided to cover the gamut of bleed-valve sizes from Shimano XT hydraulic brakes for bicycles to Brembo brakes on motorcycles and cars.

More information at: https://hkern0.com/3d-print-model/bleed-valve-tubing-clamp

Tagi