Yolocam S3 Lens Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lens cover for the Yololiv Yolocam S3. I used the compliant spring design from LXO's 49mm lens cover.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for the YoloLiv Yolocam S3, which does not come with a privacy cover. This design uses a compliant spring design inspired by LXO's 49mm lens cap, but clamps on the outside instead of the inside like traditional lens covers.
The front face is .6 mm thick (3 layers) making it easy to modify it with a logo or design in prusa slicer that is .4 mm thick (2 layers).
I had to use a blade and insert it between the body and the springs/clips to get them free. I tried a few different ways for this and that was the easiest.