Whetstone working tray and drying rack (storage case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a combined whetstone working tray that collects debris and acts as storage / drying rack too.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a worktop / storage / drying rack all in one combo for whetstone.
Whetstone dimensions: 185x65mm.
I bought one that did not come with "worktop" and when wet and put to use, it gets quite messy. So I designed my custom worktop that collects the debris and steel gunk when sharpening knives.
This one came with silicon anti slip mat, that i worked into this model too. If you dont have one, you can probably print one out of TPU.
Also came with angle finder, so the case has space to fit one. You can also put your custom one in there if you need.
After being done with sharpening it should be dried out on flat surface so I made a small rack that lets it sit from the ground for air to get in and dry out evenly. Flip every 24hrs for even dry as per user manuals.
Printed in PETG for water resistance.