Rockler Router Pro Lift cover blank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover plate with no hole in the center for the Rockler Router Pro Lift
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Wanted an actually cover so things didnt fall down into the hole. I added the fusion file if you want to make changes. I dont recommend using this for working inserts with holes like the metal ones its just not strong enough and could pop out. If routing along and a piece of wood were to catch on it and pull it out you could have flying plastic shrapnel.
Print this to .16 layer height - helps with the needed lip for the lift to hold the palte down securely.
Infil 20%
For strength and rigidity so no infil is on the main part of the plate do:
Top Layers 7 and Bottom Layers 6