1 / 3
Kenwood kMix height spacers (0.5 to 3 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height spacer for the Kenwood kMix stand mixer serie.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Height spacer for the Kenwood kMix stand mixer serie.
Used to adjust the bowl height to compensate for tools that can't be directly adjusted - like the modern dough hook design.
Available in increments of .5 mm from 0.5 mm to 3.0 mm.
Can be printed in regular PLA, top face down.