Cambridge 6800 Galvanometer Mirror Mounting Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple jig that lets you install a new mirror on your scanner perfectly centered and flat. This will probably work…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple jig that lets you install a new mirror on your scanner perfectly centered and flat. This will probably work for most of the 6800 clone scanners out there as well. I made 6.0 and 6.1mm wide mirror slots since that fits the mirrors I have. I can make different widths if needed.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Plus
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
15%
Notes:
I had to design this with the scanner and mirror slot slightly oversize to compensate for my printer. You may need to scale it up or down a little bit to get a perfect fit on your printer.
Category: Hand Tools