Flywheel cage spacers for Omnia Pro Gen 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to adjust the flywheel cage offset for the Omnia Pro Gen 2 from Dart Zone
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Open Community License v1
Spacers to place inside the blaster under where the flywheel sits on the red post. (Between the outer chassis and flywheel cage). See the picture, the yellow circled post. The red posts OD is ~5mm, so the ID of the spacer is 5.1mm. Included two options height/thickness of spacer in .5mm and 1mm. Pick and choose what you need
I placed one of the 1mm spacers and it helped but didn't quite eliminate the issue entirely of shooting down and to the right. I did have to cram the spacer on as it seemed my printer printed the ID of the spacer at about 4.95mm.