Skidplate for "Bastard" Torque bumper XR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sacrificial plate cause printed bumpers don't last long!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Sacrificial skidplate for the bumper found here: https://www.printables.com/model/1569599-torque-bumper-for-xr
NOTE: V1 is discarded. V2, just like V1 is a horror to print due to the large chamfer. V4 is better printable but not optimally shaped. Flat version should be great if you're willing to heat-shape it during install.
Not ideal compared to a real poured bumper in terms of durability or height clearance but hey..it's cheap and somewhat practical.
Needs 2x M5 nuts and 2 extra M5 screws. The 2x M5 nuts need to be inserted on the inside of bumper so the two M5 screws for the plate can be installed from the outside.
Print it with robust material and replace when worn out/broken.