1 / 13
Kailh Choc keycaps for the Starboard steno board — zdjęcie 1
1 / 13

Kailh Choc keycaps for the Starboard steno board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a parametric set of steno-like keycaps that fit the Starboard steno board

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

This is a parametric set of steno-like keycaps that fit the Starboard steno keyboard and probably any other Kailh low-profile choc V1 switches.

The interlocking patter helps pressing double-keys in the same column.

The spherical bumps help with finding the homing position, the rough texture of the off-home columns also inform you when you are resting your index or pinky on the wrong column. They serve for learning and can easily be disabled in the OpenSCAD file.

STL files are for the right hand. You can print a second set for the left hand like I did, or if you prefer symmetric keys, you can change the "left_hand" variable in the OpenSCAD file.

Print Settings

  • Supports:

    Yes

  • Notes:

    For all keys except the index long key : Print on the flat side so the the key legs are parallel to the printer's bed. Use support material for the legs, but it also help with the overhanging curve.

    Long index key : Print it tall to keep the legs parallel to the bed.

    I used Prusa slicer variable layer height (see screenshot) with the thinnest layer height for the legs and the thickest for the rest.

Tagi