Classic VW Beetle Door Hinge Mirror Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got no doors on your classic beetle? Can't see behind you? Here's the solution you've been looking for!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For anyone else with a Beetle they want to pull the doors off but haven't figured out how to mount mirrors.
This print uses the stock upper hinge mounts. My car is a 69, no idea what other years used the same hinge bolt pattern. 58-70 is a grouping I see regularly, but who knows, could be 46-2012 for all I know.
Also not sure about the original screws. I replaced all with hex drive (fhscs), original may have been phillips, but I think they were still a cone head for alignment.
File is for left side. Mirror in your slicer for the right side of the car.
File is set up for a 10mm mirror stalk with a jam nut 17mm across the flats. You'll need to change a couple dimensions and hole sizes if your mirror is different.
I recommend TPU, since they will be vibrating and bouncing around and you'll probably bump in to them.