1 / 1
Water Resistant Lithium Cell Canisters 14500 18650 21700
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Water resistant canisters for 14500, 18650 and 21700 lithium cells.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
These are lithium cell canisters that have grooved in the lid to accept an o-ring, greatly increasing water resistance. I recommend applying some silicone grease to the o-ring before installation.
The 21700 and 18650 versions are strictly for unprotected, flat top cells. The 14500 version will accept pretty much any AA or 14500 cell. I printed them using Overture PLA Plus.
They use the following o-ring sizes:
14500 - P14 (13.8mm ID, 18.6mm OD)
18650 - P18 (17.8mm ID, 22.6mm OD)
21700 - P20 (19.8mm ID, 24.6mm OD)
