iphone16 pro multi-material case - TPU + PETG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a multi-material case for the iphone 16 pro
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a multi-material case for the iphone 16 pro printed in PETG with a TPU outer cover.
There is also a recess in the back to adhere an ESR magsafe ring which can be purchased on amazon.
Additionally, there are corner standoffs so when sitting on its back it lays flat instead of angled due to the camera bump out.
I printed this on its face using supports with PETG used as the main support material and PLA used as the interface layer by setting it as a soluble support material. The bed temp was set to use the PETG temp. This was printed on a PrusaXL 5 tool machine.
I printed with Prusament PETG and Hatchbox TPU with Prusament PLA as support(interface layer only).