Elegoo Centauri Carbon Shallow Sweep Ramp Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a door sweep to help sweep filament out of bottom of printer.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi, this is a shallow sweep ramp for the centauri carbon. It is to help get out to the material from the bottom of the printer.
There is a shallow groove on the back for a double sided 3m tape to be place to keep it fixed
For non multi color infinity logo its been placed as two parts set it to print globally by item to print separate but during the same print.
For multi color printing place them together when adding into program then select by object color the infinity logo and get to printing!
You May need to TRIM the edges with the cut tool in slicer to fit the needed space for clearance of z rods
IF YOU DO NOT want the logo when it asks to place the items together or separately choose together it will combine item in perfect spot to be able to print it.
REMINDER!!!!
This item can be an a possible obstacle for full Y AXIS printing. BE SURE your objects are not larger during prints or you could potentially have a bed plate collision with this.
I will be refining it more.
Thank you and HAPPY PRINTING!!!
Jordy