1 / 1
Beefy Dome Motor and SlipRing Mount for Mark III
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stronger Dome Motor Mount for Mark III
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had the original motor mount break after a few years of use. So I made a stronger motor mount. I use a37D eccentric Motor and a Sonic hub with a 6mm D shaft. I used M4 headsets and bolts.
NOTE:
You may need to mirror this parts depending on your installation. This is for a right-sided install.