1 / 6
Prusa Core ONE / ONE+ Power Cable Slot Grommet Set — zdjęcie 1
1 / 6

Prusa Core ONE / ONE+ Power Cable Slot Grommet Set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable grommets for routing your power cables through the slot features of your Core ONE / ONE+ (pick one pair)

Ocena
5 / 5
Polubienia
10
Pobrania
27
Wydruki
2
Wyświetlenia
437
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Print in a flexible filament of your choosing, I used TPU95A. There are overhangs, but these are functional not cosmetic parts so turn on organic supports and a small amount of cleanup should do the trick.

Installing all four at once may make assembling the back panel to the base difficult; pick the two you prefer if so; I recommend the upper (smaller) pair.

Revision 28 JAN 2026: also published a modified version of the Prusa NFC cover component which is needed to clear the grommets: 

Tagi