1 / 1
Love Heart Picture Pendants (fusion360) — zdjęcie 1

Love Heart Picture Pendants (fusion360)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two variants of a small, heart-shaped pendant that can be used to keep pictures of lovers for each one to wear.

Ocena
5 / 5
Polubienia
35
Pobrania
97
Wydruki
1
Wyświetlenia
261
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution

A nice gift for lovers to give eachother. Place a picture of both of you in each half for example.

There are two main bodies, varying by the location of the hinge:

  • The bottom connector can be sat down in the open position without it falling over but is a bit more awkward to open.

  • The side connector has the advantage to be opened as you would expect but can't stand on its own

You will need both a short (heart-shaped) ring and a tall one. They serve to lock the pictures in place and the tall one helps keeping the pendant closed. The flat face should be pointing upwards as the rounded face matches the form of the main body.

The pendant will not be tightly closed by itself, but the string of the pendant will keep it closed, especially if you loop it through itself around the loop.

I added some side models to this publication as well: the simple heart with and without the loop would you want them and a stencil that can be used to help with cutting the heart form at the right dimension (middle of the rings outline)

Printing Information:

  • Print the main bodies as one piece (the hinge is print-in-place) flat on the printbed

  • Print both (heart-shaped) rings on their flat side facing the print bed (other side it rounded)

  • The models already come in the correct orientation for printing by default

  • Use regular supports to support the hinge and the loops

Tagi