MPP Index Mag Release Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A (functionally) identical model of the original MPP index finger magazine release
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My original, injection molded index mag release on my piston pump somehow snapped in half (if you look at the photo you can probably see the line where it snapped) while using an extender for it, so I modelled a new one in CAD and decided to upload it here as well.
Requirements when printing:
Print with a brim if using warp prone materials like PETG.
Supports where the green is in the last picture (there are floating cantilevers).
Recommend you print this model solid so you lessen the chance of opening up your blaster again.
Please note that this is not a one to one copy of the original, though it is a good enough of a copy to function exactly the same (maybe better durability) as the original. I have not used this long enough to say anything about its durability.
STEP included for remixing.
Yes it will work with those secondary mag release extenders. Like these: