Runcam Thumb 2 - GoPro Style Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GoPro Style Mount for the Runcam Thumb 2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a GoPro Style mount for the Runcam Thumb 2. It features a better fit then the original one provided by Runcam as well as thinner mounting tabs. The tabs are 2.5mm thick.
Print Settings:
Material: TPU
Infill: 15%
Supports: Yes
I printed this the way it imports into your slicer and painted on supports on the tabs, any other overhang does not require supports.
Notes: I decreased the print speed to 100mm/s from the 200m/s that it was set to. I also put retraction to 1mm. This helped with keeping the part less stringy. After the print I hit it with a heat gun to get rid of the rest of the strings.