Improved Bed Knobs for Tronxy XY-2 Pro "Two Piece Each"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two piece adapter for the tiny bed knobs that come stock on the Tronxy XY-2 Pro
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
As the Tronxy XY-2 Pro uses 3mm bed screws, and they're so close to the corners of the bed, I couldn't fit the bed leveling knobs I use on most of my Cartesian style bedslingers. Wanting a similar look and feel to my other machines, I made these knob adapters as large as I could without adding interference. The original brass/plastic knobs press into these adapters, so they're not replacement parts but rather "add-on" parts for the existing knobs.
The outer portion of these knob adapters prints as oriented in the STL file without supports. The inner portion of these knobs will need supports "to build plate only" to preserve the throughway rim for the Tronxy knobs. The support structure should be a single ring that separates easily from the model. I printed these in black Kingroon PETG and green XTZL3D PETG, but they should work fine printed in any rigid material. I put a dab of superglue on each of the spokes and press the center portion into the outer portion. Once the glue is set, I press the little Tronxy knobs into the inner hub and install them on the machine.