NSPanel Pro desktop stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dekstop stand for the Sonoff NSPanel Pro.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This NSPanel Pro desktop stand is designed to fit the 3.95" model.
It's designed to be printed upside down to leave the best possible finish on the part of the stand that is visible. It only requires support on the frame of the display-insert.
It requires two M3-heat inserts and two M3 screws to mount the display to the stand. If you want to use the screws included with the display, you can always add a modifier for the two mounting holes to widen them and using appropriate threaded heat-inserts.
After feeding the cord through the hole on the back, make sure to leave some slack inside the stand and tie a knot to ensure it won't get loose if someone trips over the cord.