1 / 10
Valentinstag - Valentine's Day „Pause drücken, Liebe einlegen, weiterdrucken.“ — zdjęcie 1
1 / 10

Valentinstag - Valentine's Day „Pause drücken, Liebe einlegen, weiterdrucken.“

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dieses Herz wird in einem Stück gedruckt, während des Drucks befüllt und erst beim Aufbrechen enthüllt

Ocena
0 / 5
Polubienia
30
Pobrania
56
Wydruki
0
Wyświetlenia
673
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Love Inside – Das Herz, das erst beim Brechen schenkt!

(DE) Dieses Herz ist mehr als nur Deko: Es wird komplett in einem Stück gedruckt und besitzt eine integrierte Sollbruchstelle in der Mitte. Während des Drucks kann/sollte der Prozess von Euch ab einer gewissen Höhe pausiert werden, um ein persönliches Geschenk wie Ring, Kette, Gutschein oder Liebesbotschaft usw. einzulegen. ACHTUNG! Das eingelegte Geschenk darf den Druckkopf nicht behindern! Danach wird der Druck fortgesetzt und beendet damit das Geschenk sicher eingeschlossen und perfekt verpackt ist. Ich habe zusätzlich kleine Stützen mit eingebaut, damit wird die Deckplatte leichter und schöner zu Drucken, man braucht keine extra Stützstrukturen. Die kleinen Säulen können mit Leichtigkeit beim Auspacken des Geschenkes mit ausgebrochen werden und behindern nicht.

Zum Öffnen wird das Herz später an der Sollbruchstelle geteilt – und erst dann zeigt sich die Überraschung im Inneren. Emotionaler geht Verpackung nicht. Natürlich braucht man schon ein kleines bisschen Kraft um das Herz zu brechen, aber das ist ja normal oder :-) ? Am besten an einer Tischkante oder ähnlichem brechen und trotzdem Vorsicht walten lassen damit man sich nicht verletzt. Es ist definitiv KEIN Kinderspielzeug.

Mit nur kurzer Druckzeit und freier Skalierung (je nach Geschenkgröße) von euerer Seite aus, ist das Herz schnell gefertigt und mit oder ohne Schriftzug verfügbar. Die Schrift kann je nach Slicer selbst hinzugefügt werden. Die Druckeinstellungen lassen sich flexibel anpassen

Der Prototyp entstand auf einem:

  • Bambu P1S mit 0,4 mm Düse

  • 0,2 mm Schichthöhe

  • Wandstärke 1

  • Infill 0

  • OHNE STÜTZSTRUKTUREN

Ein simples Druckteil wird so zu einem interaktiven Valentinsgeschenk mit Wow-Effekt – persönlich, kreativ und direkt aus dem 3D-Drucker. 

Ich wünsche Euch viel Spaß beim Schenken und Freuen!! 

(EN)

Love Inside – The heart that only reveals its secrets when broken!

This heart is more than just decoration: It's printed in one piece and has a built-in break line in the middle. During printing, you can/should pause the process at a certain height to insert a personal gift such as a ring, necklace, gift certificate, or love note. IMPORTANT! The inserted gift must not obstruct the print head! The printing process then resumes and finishes, ensuring the gift is securely enclosed and perfectly packaged. I've also included small supports to make the top plate easier and easier to print; no additional support structures are needed. These small supports can be easily broken off when unwrapping the gift and won't get in the way.

To open the heart, simply break it along the designated line – and only then will the surprise inside be revealed. It doesn't get more emotional than this. Of course, it takes a little bit of force to break the heart, but that's to be expected, right? :-) It's best to break it on a table edge or similar surface, but still be careful not to injure yourself. It is definitely NOT a toy.

With a short printing time and free scaling (depending on the gift size), the heart is quickly produced and available with or without text. The text can be added yourself, depending on your slicer. The print settings are flexible.

The prototype was created on a:

  • Bambu P1S with a 0.4 mm nozzle

  • 0.2 mm layer height

  • Wall thickness 1

  • Infill 0

  • WITHOUT SUPPORT STRUCTURES

A simple printed part thus becomes an interactive Valentine's Day gift with a wow factor – personal, creative, and straight from the 3D printer.

I hope you have fun giving and receiving it!!

Tagi