HYPERFORMA_Floatwheel ADV-ADVPro Bearing Dust Seal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearing Cover for Floatwheel ADV / ADVPro
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 83
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An essential part to ensure the longevity of the bearings on the Floatwheel ADV/ADV Pro, especially for wet and off-road use. It helps limit the ingress of moisture, water, and dirt into the original bearings, which unfortunately are not waterproof.
This is my interpretation of an optimized seal, developed starting from the designs of other users. The fit is quite snug.
The use of TPU 95A is recommended. A TPU that is too soft may create excessive grip on the motor shaft, so a high-hardness flexible filament is advised.
PRINT TIP: Make sure the model is printed fully solid; increase the number of shells if necessary.
Enjoy!