Harbor Freight Magnetic Tool Holder Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I picked up a magnetic tool bar from Harbor Freight (item # 60433) and was disappointed that the mounting holes were…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I picked up a magnetic tool bar from Harbor Freight (item # 60433) and was disappointed that the mounting holes were not 16" on center so I could mount it securely to my wall studs. Sure, I could use wall anchors, but what fun is that when you have a 3D printer?!
A pair of these simple wall mounts, when spaced 16" apart, will allow you to mount the magnetic bar using 5mm x 12mm or 3/16" x 1/2" machine screws. I also modeled in a slot for a standard cable tie so you can secure them if you're not placing these 16" apart.
An unplanned bonus is that the 1/2" standoff from the wall give me space to hang some items that aren't magnetic or are too heavy.
These print pretty quickly (~ 30 minutes each) and work fine with a .3 layer height.
Fusion 360 source file included if you'd like to tweak this for your own needs.
Print Settings
Printer:
LayerFused x301
Rafts:
No
Supports:
No
Resolution:
.3 layer height
Infill:
20% Gyroid
Filament:
Any PLA
Any
Notes:
The wall mount hole and chamfer are designed to work well with standard drywall screws. The hole for mounting the tool bar should self-tap with a 5mm or 3/16" machine screw.
Designed in Fusion 360. Source file included.
Category: Organization