Loops for Ortlieb Lenkertasche/Handlebar bag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The strap of your bag is constantly getting loose? This loop allows you to attach a simple hook.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I like the Ortlieb handlebar bag, but the strap was always getting loose when I didn't want it to. So I changed the mechanism to use simple spring hooks (Karabiner) to attach the strap instead of the open loop construction.
You'll need three M3 screws for each of these loops, I've used 2x16mm and 1x20mm, but other/similar lengths will work as well. The screws go directly into the plastic, no heatset inserts and no nuts are required.
I've printed this with PLA and it seems to hold fine for now, I believe a lot of the load is held by the screws and not the plastic. No supports are needed, print settings don't really matter. Although I had some bed adhesion issues due to the small footprint, so you might want to add mouse ears or a brim if you experience problems with that. I've used 0.2mm layers.
Onshape link: https://cad.onshape.com/documents/a03a057605e7e1495b0207dc/w/165a030857b9c8568381c9d6/e/b43f8e8d9a711d46141ace93