Low-Poly Heart Gift Box - Valentine's Day [Support-Free]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A support-free, low-poly box.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
❤ Not Just Cute, It's Satisfying. A departure from traditional round hearts, this is a Low-Poly Geometric Heart Box. It is designed for a modern aesthetic and a pleasing tactile experience.
✨ Key Features
100% Print-in-Place: No hinge assembly required. Just print and play.
Zero Supports: Designed with strictly managed overhang angles. No waste, no cleanup needed.
Magnetic Lock: Features hidden slots for magnets. While optional, using them creates a satisfying "click" and keeps the lid securely closed.
Gemstone Look: The low-poly facets catch the light beautifully, especially when printed in glossy PETG or Silk PLA.
🧲 Bill of Materials (Magnets) You will need 2 rectangular magnets.
Slot Size: Designed for magnets approx. 9 x 4.5 x 2.6 mm.
Tip: If the magnets are a bit loose, I recommend using a drop of superglue.
⚙ Print Settings (Tested with PETG) This model is optimized for easy printing. Recommended settings are:
Material: PETG (Recommended for durability and shine) or PLA.
Supports: NONE. (Seriously, turn them off!)
Perimeters (Walls): 2 or 3 loops. (Critical for PETG to prevent the infill pattern from showing through the surface).
Infill: 15-20% Gyroid or Grid.
Layer Height: 0.2mm recommended.
⚠ Assembly Note (Magnet Polarity) Glue the magnets into the slots after printing. IMPORTANT: Before gluing the second magnet, double-check the polarity! Ensure the magnets attract each other when the lid is closed. If you get this wrong, the box won't close! 🤣