Terminator Wall Plaque – Half Human (Schwarzy) Half Endoskeleton 15x20cm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal Terminator wall plaque with half Schwarzy face and half T‑800 skull silhouette, optimized for easy 3D printing
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Hey visitor, found your favorite film or TV show? Check out the full movie collection here:
https://www.printables.com/@WalterSpanu_3005190/collections/2922712
Terminator-themed silhouette wall plaque featuring Arnold Schwarzenegger's iconic half-human face transitioning to the menacing T-800 endoskeleton skull. Bold minimalist line art captures the cyberpunk sci-fi essence from the 1984 classic film.
Designed as a thin, flat relief (3-5mm thick) for effortless 3D printing and direct fit into a standard 15x20cm picture frame. No supports needed—print face-up on the bed.
Perfect for movie fans' decor; achieve dramatic effect with black silhouette on white/glow background via multi-color printing (pause after base layer to swap filament).
Printing recommendations:
Layer height: about 0.2 mm.
Infill: 15–20% is sufficient because most of the geometry is thin.
Supports: not required if printed flat with the front side facing up.
No glue required for "full version" (check the STL).
For a two‑colour effect, print the background and silhouettes separately in different colours or use a filament change at the appropriate layer.
Default frame dimensions:
Inner size: 140 × 190 mm
Outer size: 150 × 200 mm
Back holes: diameter 7 mm, depth 2.69 mm (for hanging or connecting frames).
For a better “experience”, check the Modular Wall Art Frame 200×150 project on my profile and combine this plate with other movie‑themed silhouettes to create a full Star Wars or cinema wall.