LED Strip Light for Printrbot Simple Metal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple LED strip light for the Printrbot Simple Metal.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Based on the LED Holder for Printrbot Simple Metal by Sibanamush.
I simplified his design to use LED strip lighting instead of individual LEDs. The entire part is one piece and includes a skirt for blocking stray light and zip-tie holes to prevent the wire from pulling on the strip itself.
The part is designed to be a friction-fit onto the printer's Y-Arm. You may need to scale the print slightly to get it to fit well.
I used "LE 12V DC Flexible LED Strip Lights" purchased from Amazon for the lights themselves, soldered to 22 AWG wire. The strip is adhesive-backed, but I added a few dabs of epoxy for good measure.
Category: 3D Printer Accessories