1 / 1
Woplus kitchen drawer clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Drawer clip for the Woplus kitchen drawer (sold on Amazon etc). This normally comes with 4 plastic black clips to hold the drawer/rack in place. I lost some clips when unpacking so I had to redesign them.
Hopefully this will help someone else who also lost their plastic clips or as a replacement. Since this part needs to be able to bend a little bit, I printed it in PLA with only 15% infill. Which was enough for the clip to snap to the drawer and stay in place.
Print settings:
PLA
0.15mm SPEED
15% infill
Supports on build plate only