1 / 7
Headless Gourd Shaped Tenor Ukulele for 300mm Printers — zdjęcie 1
1 / 7

Headless Gourd Shaped Tenor Ukulele for 300mm Printers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Some has asked me about how to print my gourd shaped ukuleles (e.g. http://www.thingiverse.com/thing:1868201) on…

Ocena
0 / 5
Polubienia
8
Pobrania
21
Wydruki
0
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Some has asked me about how to print my gourd shaped ukuleles (e.g. http://www.thingiverse.com/thing:1868201) on smaller printers as the unibody design requires delta style printers that can print the unit vertically with ~500mm height and 200mm x 100mm on the X-Y plane.

Although the use case of accommodating smaller printers are anticipated in my Gugulele scripts (https://github.com/bguan/gugulele), it may be unclear to casual users how to drive the parameters to make it happen. So I have generated this Tenor sized ukulele model (scale length 430mm ~17") to make it possible to print on printers with Print Size ( X Y Z ) of at least 300mm x 200mm x 60mm, and the model is meant to be printed in a horizontal fashion.

The pieces are to be glued together. The screws are used for decorative and alignment purpose. M1.6x12 for fretboard long holes e.g. http://www.amazon.com/dp/B00XP4OD5Q

and M1.6x4 for body, bridge and fretboard short (mid-line) holes e.g. https://www.amazon.com/dp/B00XP4ZWY2. Through body grooves are there for 2 carbon fiber rectangular rods (e.g. http://www.acpsales.com/.125-x-.325-Rectangular-Rod.html) to counter the strain from string tension. The tuner holes are placed at the tail end, with design that is compatible with most ukulele and guitar tuners ranging from $5 to $50, but some rimming may be necessary.

I haven't printed and made this particular model yet, so please let me know if you've made one and succeeded.

Category: 3D Printing

Tagi