Valentine1 G2 Concealed Mount for Tesla Model 3/Y/CT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small mount for the Valentine1 G2 (V1G2) Concealed Display.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this as I wanted a mount for the V1G2 Concealed Display to hide the wire and sit fairly flush to the screen.
Print settings:
Supports On: Tree Auto, 30 degrees, Only on build plate.
Wall Loops: 4
10% Grid or Gyroid (infill really doesn't matter, it's a small part, pick what you want)
Since this will be in a car I highly suggest using ABS or ASA. You could probably get by with PETG, but wouldn't really recommend it.
Extra Items Needed:
Thin 3M Mounting Tape - 0.6mm to 0.8mm thick
EVA Foam Tape - 1mm thick
Use the 3M mounting tape for mounting it to the back of the screen. In side where the concealed display sits, I lined the top, bottom and right side with EVA foam tape.
I lined it with the foam tape for two reasons:
To keep it snug and held in place and
The wire that comes from Valentine1 with the concealed display has a long cable boot which would cause the display to tilt slightly. Lining the right side with the EVA foam gave enough friction to stop it from tilt and just gave it an overall better hold.
** Will update later with some additional/better pictures.