Netter's Flashcard Display (Staggered)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a staggered display stand for the 5th edition Netter's Anatomy Flash Cards that med students commonly use
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a staggered display stand for the 5th edition Netter's Anatomy Flash Cards that are commonly used by medical students (https://www.amazon.com/Netters-Anatomy-Flash-Netter-Science/dp/0323530508).
I didn't like how the flashcards are meant to be stored in the box between uses, and I didn't like how annoying it was to access different flashcards from specific body systems. Making a cool display with easy access was the primary motivation behind the design. These are my measurements for each of the 7 flashcard body systems:
Head and Neck ~20.2mm
Back and Spinal Cord ~5.0mm
Thorax ~6.2mm
Abdomen ~7.5mm
Pelvis and Perineum ~5.9mm
Upper Limb ~15.8mm
Lower Limb ~17.6mm
I then added a bit of wiggle room for the cards (~1mm on each side). For the staggering, there is a ~10mm height difference between each of the stacks, and ~6mm between each of the holders. I was able to print this on my Prusa-Mini (total print size was 158.5mm x 170.82mm x 121.77mm) at .25 mm layer height and 10% infill, and it took around a day to print.
Category: Organization