Elegoo Neptune 2 Stock PSU Low profile Rear Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to Lower the Power supply so I it wouldn't interfere with my light bar's power cord, and to also lower the…
- Ocena
- 4,6 / 5
- Polubienia
- 48
- Pobrania
- 255
- Wydruki
- 5
- Wyświetlenia
- 1618
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to Lower the Power supply so I it wouldn't interfere with my light bar's power cord, and to also lower the center of mass. Modified the original design to accept the thicker power supply, lined up mounting holes and avoided ventilation holes.
I also added a version that has mounting bracket for a heated bed cable chain and an end cap chain mount for the X axis/extruder cable.
The thicker power supply does require added feet as the power supply is thicker then the extrusions. I use https://www.thingiverse.com/thing:4875576
You'll also want to turn the Y axis motor 90 degrees so that connector doesn't get pinched.
Category: 3D Printer Parts