Gulfcoast Robotics LED Light Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Picked up a LED light for my printer from Gulfcoast Robotics but since the Elegoo Neptune 2 doesn't have a slot on the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Picked up a LED light for my printer from Gulfcoast Robotics but since the Elegoo Neptune 2 doesn't have a slot on the front face of the extrusion I had to design these clips to attach it to the printer. They just clip into the slot on the top of the extrusion. You will need at least 2 clips, or scale up one to cover most of the length of the light.
They work by unscrewing the end cap on the end of the light without the power adapter, then the two keys slide into the slots on the light casing.
These do mount leave a pretty stark shadow from the X axis extrusion so I may release a V2 that pushes the light more forward to see if that helps.
Print Settings
Printer:
Neptune 2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
Hatchbox PLA
White
Notes:
Print on the edge, make sure to adjust for elephants foot, or at least clean it up as its a pretty tight fit and it wont fit on otherwise.
Category: 3D Printer Accessories