Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elevate your desk setup with this Modern Geometric Coaster.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Elevate your desk setup with this Modern Geometric Coaster. Designed with a sharp, industrial aesthetic, this coaster features unique angular grooves and a dedicated center recess for a felt inlay to absorb condensation and protect your surfaces.
It’s a perfect blend of 3D printing and DIY craft. Whether you use it for your morning coffee or your late-night gaming sessions, its bold orange (or any color of your choice!) will make a statement on any concrete or wooden desk.
Features
Unique Design: Industrial-inspired geometry that stands out.
Felt Inlay: Designed for a circular felt pad (standard size) to provide a soft landing for your mug.
Easy to Print: No supports required.
Anti-Slip: The wide base ensures stability.
Print Settings
Material: PLA, PETG, or TPU (Orange PLA recommended for the look in the photos).
Infill: 15-20% (Grid or Gyroid).
Layer Height: 0.12mm for a clean finish.
Supports: None.
Assembly Instructions
Print the coaster.
Measure the inner circular diameter (approx. 60mm).
Cut a piece of felt or cork to size.
Glue it into the center recess using a drop of superglue or double-sided tape.