Gridfinity MTG Deckbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity-compatible deckbox for 100-card decks.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I noticed a lack of deckboxes that were both gridfinity-compatible and that satisfied my needs for a box, so I sat downand made my own!
It fits ~110 singled sleeved cards and ~13 sleeved tokens in the dedicated slot.
You could technically remove the separator with a negative shape - then it'll fit a double sleeved deck with a few loose tokens.
It requires 6x2mm magnets (8x) to close. Use CA glue or UV resin, both worked well in my testing. The boxes will also accept 6x3mm magnets for the base.
You can also add an SVG logo of your choosing (with PrusaSlicer and forks). Note that in the linked repo, some of the logos may not work and will simply give an outline of the logo (Fallout comes to mind here).
The models comes preloaded with a logo on the base, you can choose to replace it or remove it entirely.
For the top part, you shouldn't need supports if your printer is performant with bridges. I advise printing it in the provided orientation in order to make the top of the box palatable to look at.