Dial Indicator Mount for Build Plate Calibration – FDM Printable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder can be used to measure the flatness of a surface using a Gantry and a dial gauge
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I used it to check the flatness for calibration purposes of a new DLP resin print bed (as shown in the image)
This precision dial indicator mount is designed for accurate bed leveling and flatness measurement on FDM 3D printers. It securely holds a digital dial gauge in contact with the build surface, allowing you to detect even the slightest height deviations across the bed. Ideal for users who want to fine-tune their first layer consistency or validate mechanical alignment.
The mount shown here is installed on a textured build plate and paired with a standard digital indicator. It was printed using filament-based FFM technology with PLA material, using default print settings (0.2 mm layer height, 15–20% infill, no supports required). The countersunk flat M3x12 head screw ensures a snug fit and stable readings without wobble or drift.