Gridfinity Mill T-Slot/Fixture Clamping Set Storage Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile Gridfinity storage trays for Mill T-Slot/Fixture clamping set.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Low profile gridfinity storage for a T-Slot clamping set in 2 4x7x2u Gridfinity solid base form factor. These are intended for a 7/16 T-slot set with 5/16 bolt studs in 3-8in lengths.
The Strap/Step tray had extra space, so I added recesses for a pair of 1-2-3 blocks, as they are often used with the clamps in various setups.
Gridfinity bases courtesy of https://gridfinity.perplexinglabs.com/pr/gridfinity-rebuilt/0/0
Printed on a Core ONE with Sunlu PLA+ Matte White with 3 bottoms/tops and 2 perimeters. Both trays were split with a dovetail.